WEEKE BP 140 CNC Machining Center with Auxiliary Routing Spindle & Flat Table

Description

WEEKE
BP 140
CNC Machining Center with Auxiliary Routing Spindle & Flat Table
Specifications:
Work area capacity: X-Axis 110.25" (2,800 mm), Y-Axis 41.34" (1,050 mm).
X-Axis Stroke 146", Y-Axis Stroke 52", Z-Axis Stroke 10.24" (260 mm).
Rapid traverse speeds: X-Axis 263 FPM (80 MPM), Y-Axis 196 FPM (60 MPM), Z-Axis 64 FPM (20 MPM).
Work table: (8) Panel support benches with 51" x 125" Flat table, (Seller has cut 4' x 12' Sheets with an extension support).
Equipped with:
Boring unit: (1) 2 HP (1.5 kW) Motor, 4,000 RPM, (21) Independent vertical spindles, (10) X-Axis, (10) Y-Axis, (1) Offset spindle for up to 35 mm (1.38") Diameter Drills, (1) Independent 4-way Horizontal boring block with (6) Spindles: (2+2) X-Axis & (1+1) Y-Axis, Maximum horizontal boring depth 1.77" (45 mm), (1) X-Axis Grooving saw with 100 mm (3.94") Diameter Blade, 2 HP (1.5 kW) Motor.
Routing: (1) 10 HP (7.5 kW) High speed vertical electro-spindle (Main spindle) with HSK F63 Adaptor router, 11 KVA Frequency inverter, Programmable speeds 1,000 - 18,000 RPM, 5 kW (6-1/2 HP) Auxiliary routing spindle with .98" (25 mm) ETP Hydro clamping chuck, 8-Position Ride along automatic tool changer.
IPC Front End: WEEKE "HOMATIC-2000" with WINDOWS & WOODWOP Version 4.5 Operating system; 17" Color monitor, Industrial keyboard, 1.44 MB Floppy disk drive, 2 GB Hard drive, 32-bit Processor, Ethernet interface, RS-232 Serial interface.
NUM Programmable logic control (PLC) for linear, circular & helical interpolation, All mounted in separate free-standing control cabinet, Pedestal, Pendant & (2) Foot pedal controls.
Complete with:
Manuals.
NOTE: No Vacuum Pump.
NOTE: Photos were recently taken of installed machine. Machine was then de-installed and stored.
Power Requirements 230/460 V, 60 Cy, 3 Ph.
Dimensions: 265" x 104" x 120" H.
Weight: 11,500 Lbs.
We are happy to answer questions or provide a shipping quote to your location