Orientek T43 Fusion Splicer + K320 SM OTDR 1550nm FTTH Splicing Tool Kit

Description

Orientek T43 Fusion Splicer + K320 SM OTDR 1550nm FTTH Splicing Test Kit
Description
1: T43 Fusion Splicer Specification
Subject
Description
Alignment
IPAS Core to Core Alignment (Image Pattern Analysis Alignment System)
Applicable fibers
SMF(ITU-T G.652), MMF(ITU-T G.651), DSF(ITU-T G.653), NZDSF(ITU-T G.655),
EDFA, EI980, Splicing available with different type fiber(SM/MM), ITU-T G.657
Compatible Fiber / Cable
0.25mm/0.9mm/3.0mm/ Flat/Drop cable
Fiber cleave length
250 um(Coat) : 8 ~ 16mm, 900um : 16mm
Typical splice loss
SMF : 0.02dB, MMF : 0.01dB, DSF : 0.04dB, NZDSF : 0.04dB
Return loss
Less then -60dB
SPLICE Time
SPLICE : Typical 9sec, Tube Heat : Typical 30sec with S-160(60mm) Tube
Program
SPLICE Mode : 100, Heat Mode : 50
Storage of splice result
4,000 results
Operating altitude
0 ~ 5000m above sea level
Operating condition
-10
℃
to 50
℃
, humidity : 95%, non-Condensing
Storage condition
-40
℃
to 80
℃
, 0 to 95% RH
Protection
Wind 15m/s , shock proof, water proof, dust proof
SIZE, Weight
130W 130L 135H (include Monitor), 2.2Kg (Exclude Battery)
Terminal
USB, External Power
Power
DC 14.8V Battery (7800mAh), 100 ~ 240V AC Adapter
Additional power
DC 12V automobile power outlet available
No of splice/Heating with Battery
200cycle, lithium polymer batteries
Electrode
4,000 times splicing without exchange
Languages
English, Spanish, French, Chinese, Portuguese, Italiano, Russian, Indonesia, Turkish
Display
Two CMOS cameras and 5.0 color LCD monitor
Fiber view and magnification
X/Y 300X, 170X
2: K320 OTDR Specification
15 Hours Battery Operation
Imagine working an entire work shift at your remote work site without worrying a . bout running out of battery power.
The K330’s
powerful Li-Ion battery 4200mah will last for an amazing 18 hours under the Telcordia standard conditions
and 10 hours even with the
laser continuously turned on!
Visible Light Source
Visible, continuous/modulated red light
laser.
Invaluable test instrument for checking continuity of  patchcords, launch fibers, or short
fiber trunks. Breaks and bendings in fiber can be identified visually as
the
visible light exits the fiber on such fault
events.
*Available in K330 only.
PARAMETER
K320
Central wave length
1550nm ± 20nm
Type of compatible applicable fibres
SM
Dynamic range
30dB(70-80km)
Min. event deadzone
1.6m(single-mode)
Ranging accuracy
±(1m+sampling interval+0.003%×distance)(excluding refractive index imbedding error)
Resolution of ranging
0.1m-16m
Loss threshold value
0.01dB
Linearity
0.05dB/dB
VFL output power
10mW (only integrated in K330)
Measurement range
0.3, 1, 3, 5, 10, 30, 60, 120km (single-mode)
Pulse width
5, 10, 20, 40, 80, 160, 320, 640, 1280, 2560, 10240ns
Number of sampling points
65K
Waveform storage capacity
1000 frames
Range of refractive index
1.00000
∼
2.00000
Range of optical-cable correction factor
0.80000~1.0000
LCD display
3.5” color LCD
Port
USB
Optical output port
FC/UPC (SC/UPC、LC/UPC optional)
Power supply
AC/DC adapter:
AC input: 100V
∼
240V(1.5A)
Output DC: 9V(2A)
Power frequency: 50Hz
∼
60Hz
Internal lithium battery: 7.4V, 4200mAh
Working hours of battery: 15 hours (normal temperature)
Menu language
English/Spanish/Portuguese
Environmental requirements
Storage
temperature:
－
40
℃∼
70
℃
(exclusive
of
battery)
Relative humidity: 5%
－
95%, no
condensation
Dimensions
250mm×130mm×66mm
Weight
About 1kg
3: Mini Optical Power Meter + Mini Light Source
T25M Optical Power Meter
① Wavelength : 800 ~1700 nm
② Detector : InGaAs
③ Measurement Range : -70~+3 dBm
④ Resolution : 0.01 dBm
⑤ Connector : FC+SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥ Power Supply : Alkaline Battery(3 AA 1.5V)
T15MS Optical Light Source
①  Wavelength : 1310/1550nm
② Typical Output Power : -5dBm
③ Output Stability : ±0.05dB/15mins; ±0.1dB/ 8hours
④ Modulation Frequencies : CW,270Hz,1KHz,2KHz
⑤ Connector : FC+SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥ Power Supply : Alkaline Battery(3 AA 1.5V )
4. Visual Fault Locator:
- Pocket size Visual Fault Locator 1mw 10km
Payment
We only accept PayPal.
Payment must be made within 7 calendar days of the auction end time.
Shipping
Please verify your address .
If other address, please advise us
by
EBAY message.*
1.
Lead Time:
stock available, usually can ship within 24 hours upon receipt of payment.
2.
Delievery time :
Faster coutier(such as Fedex, DHL , EMS, TNT.....) would take 5-10 working days
Contact
Any inquiry, please feel free send us message.
We will reply your message in 24hours
Manufacture Introduce
We are an ODM (original design manufacturer)/OEM (original equipment manufacturer) providing a variety of support services related to design, manufacturing, and after-sales service for Optical Fiber Communication (OFC) products.
And also provide
Buyer Lable service
. We sell products to clients who use their own brand to introduce into the marketplace
Warranty
Warranty Period:
1 year.
In Warranty:
1. if the machine comes with any small problem: please contact us asap.
we will give you online supports: Phone Call, Email and Video Tutorial. and send you the replacement parts by express
.
2. If the machine comes with big problem: we will ask you to send it back to us for repaired.
and then send back to you. We will send a new machine to you if we can not fix the broken machine.
Out of Warranty:
If the buyer need the parts, the seller promise offer it only at the basic cost.