-40%
FSM-70R+ Ribbon Fusion Splicer Fiber Optical Splicing Machine with CT-50 Cleaver
FSM-70R+ Ribbon Fusion Splicer Fiber Optical Splicing Machine with CT-50 Cleaver

FSM-70R+ Ribbon Fusion Splicer Fiber Optical Splicing Machine with CT-50 Cleaver

$ 5227.2

Availability: 100 in stock
  • Minimum Operating Temperature (Nominal): -10°C
  • All returns accepted: Returns Accepted
  • Condition: New
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: Fujikura
  • Splicing time: 11sec
  • Country/Region of Manufacture: Japan
  • Model: FSM-70R+
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Maximum Operating Temperature (Nominal): 50°C

    Description

    The 70R+ is equipped with a precision, fixed v-groove for splicing single fiber
    or ribbon fiber up to 12 fibers.T
    he 70R+ has added automated and enhanced user control features to
    increase splicing efficiency. A user programmable,automated wind protector expedites
    the splicing process by automatically closing to initiate the splice process,and opening
    upon splice completion.A new auto-start “clamshell design”tube heater applies heat
    to both sides of the splice protection sleeve resulting in a 40-second shrink time for
    12-fiber ribbon. The result is a total splice process time of approximately 55 seconds!
    Ruggedness and durability are greatly enhanced by a mirror-less optical system and
    "severe-impact resistant" monitor.Battery capacity is now 110 splices/shrinks.
    An innovative transit case doubles as a built-in or mobile workstation and makes
    splicing easier than ever before.
    Features:
    1.Splicing:11sec / Tube-heating:18sec.
    2.Fixed v-groove, Dual-axis observation system
    3.Up to 12-fiber ribbon splicing.
    4.Minimum manual operation,splice in 5 steps.
    5.Multi-functional carrying case with integrated work station.
    Specifications:
    Model
    FSM-70R+ Fusion Splicer
    Applicable Fibers
    Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
    Fiber Count
    Single, 2, 4, 5, 6, 8, 10, 12
    Cladding Diameter
    125 μm
    Coating Diameter
    Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm
    Fiber Cleave Length
    10 mm
    Typical Average Splice Loss
    0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards
    Splicing Time
    Typical 15 seconds with standard single-mode fiber
    Arc Calibration Method
    Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
    Splicing Modes
    100 preset and user programmable modes
    Splice Loss Estimate
    Based upon dual camera cladding alignment data
    Storage of Splice Result
    Last 2000 splice results stored in the internal memory
    Fiber Display
    X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
    Magnification
    35X to 90X
    Viewing Method
    Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
    Operating Condition
    0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
    Mechanical Proof Test
    1.96 to 2.25 N
    Tube Heater
    Built-in tube heater with 30 heating modes; auto-start function
    Tube Heating Time
    Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
    Protection Sleeve Length
    60mm,40mm,Micro
    Splice/Heat Cycles with Battery
    Typical 110 cycles with power save functions activated
    Electrode Life
    1,500 ARC Discharges
    Power Supply
    Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
    Terminals
    USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03
    Wind Protection
    Maximum wind velocity of 15m/s (34 mph)
    Payment:
    We accept payment via Paypal only.
    Payment must be made within 5 days, Non-payment may result in an UPI (Unpaid Item), eBay will automatically close your account if you accumulate 4 UPI's total.
    Import cutoms duties or taxes which are not included in item price, if any, are on buyer's responsibility. You can check with your local customs office for further information prior to bidding/buying.
    Shippment:
    Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
    It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
    About US:
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.