Biesse Rover A 3.4FT Flat Bed CNC Router - Only 6000 Hours!!!

Description

Biesse Rover A 3.4FT K1 Flat Bed CNC Router - Only 6000 Hours!!!. Installed New 2008
4x12 Cantilever Gantry, Phenolic flat table with ATC and Boring. Busch Mink Pump.
Available around 1st of May (Could be sooner)
Running Biesseworks Advanced Software. Inspections available by appointment
ABOUT:
We are still using this machine and it will continue to be in production until approx. May 1.
This machine has very low hours for its age. We installed it new in April 2008.
With only 6000 hours on the router, that's an average of only 10 hours per week!!
Main items produced have been MDF doors and plywood cabinet parts. No doubt we have made
money with this machine!!  It's been a very good machine for us with very little downtime.
We did opt to have the spindle bearings replaced in March 2020 along with the linear bearings
in the Y axis.
All other issues were very minor and were handled with over the phone tech services.
We've kept the grease on the bearings and the oil changed in the pump as per specs.
Hate to see it go, but we need a bigger machine so this one will be in our way.
SPECS:
Working Fields:  X = 3685mm (145in) Y = 1290mm (50.75in)  Z = 140mm (5.5in)
16 hp (12kW) HSD ATC electrospindle for HSK 63F tool body
10 tool ride along automatic tool changer
Rack and Pinion drive in the X, Ball screws in the Y and Z
Phenolic work table with vacuum channels suited for gasket material, vacuum holes and plugs
4 Work position locator pins, 3 in back, 1 on side, movable
Currently 1 vacuum zone, can be configured for 2
Busch Mink 1322 Av rotary claw vacuum pump, 9 hp motor, 212 CFM
Boring head  18 tool: 7 in the X, 7 in the Y, 2 in the horizontal X, 2 in the horizontal Y
Tethered remote with Speed Control, E-Stop, and Tool Release
PC Based control system XP600
Windows XP HP computer housed in an air conditioned control cabinet along with all
electrical and electronic devices.
Running Biesseworks Advanced parametric programming CAD/CAM with nesting module
Includes safety zone mats, fencing, maintenance tool kit, all manuals (not shown in pics)
Setup to run on 240V 3Phase power. Autotransformer included for varying voltage service.
LOGISTICS:
This piece of equipment will require rigging prior to shipping.  All associated costs
of rigging will be responsibility of buyer.  Shipping/Freight cost by buyer.
Machine offered AS-IS, Where-IS.
No warranties or guarantees offered, written, or implied.
Please use the "Contact Seller" button to ask any questions you may have.
Serious offers considered. Thanks for looking.